4K
Native 4K DCI resolution (4096 x 2160) for incredibly detailed projections
AISYS
Improved optical components for powerful 4K projection
Laser
High colour 6000 lumen brightness for sustained low maintenance operation
LCOS reflective display, TFT Active Matrix
0.74” diagonal, 3 panels
approx 17:9
4096 x 2160 (4K), 8,847,360 pixels
Blue laser diodes and yellow phosphor
F2.1 - F2.4; f=22.7 – 39.8mm (4K Lens)
1.76x Motorised (4K Lens)
Motorised
Spigot type
Vertical: +/-73%*
Horizontal: +/-11%*
6,000 lumens**
3,600 / 2,400 lumens**
80% or more (When 4K lens used)
4000:1 (When iris is set to close 9)
22,000:1 (When iris is set to close 9)
0.45m – 86.0m (Depending on lens)
40” - 600” (86 x 54cm - 1292 x 808cm Depending on lens)
2.0 - 5.3m (4K lens)
1.34:1 - 2.35:1 (4K lens)
1.76x (4K lens)
Vertical & horizontal: +/-20°
640x480, 720x480, 720x576, 800x600, 1280x720, 1024x768, 1366x768, 1440x900, 1280x1024, 1920x1080, 2048x1080, 2560x1080, 1920x1200, 2048x1200, 2560x1440, 2560x1600, 3840x2160, 4096x2160
1280x480, 3840x2160, 4096x2160
Equivalent to the digital image input
HDBaseT (100BASE-TX)
Not Supplied
HDMI x 2
DP x 2
HDMI, DP & HDBaseT
RJ-45 (HDBaseT) Image, audio, control signal & network
3.5mm stereo mini-jack
3.5mm mini-jack
3.5mm mini-jack
USB Type A (Firmware update)
Mini D-Sub 9-pin / RS-232
RJ-45 HDBaseT input (100BASE-TX)
IEEE 802.11b / g / n
Up to 25m (no electric wave interference / clear view to access point)
Open / WEP / WPA-PSK TKIP / WPA-PSK AES / WPA2-PSK TKIP / WPA2-PSK AES
Infrastructure mode
PjAP (Projector Accss Point) mode
Acquired. Push Button Method (PBC) & PIN code method (PIN)
Four rotary feet, extension length 14.6mm.
Maximum angle of elevation +/-1.8°
480mm x 196mm x 545mm (excluding lens)
19kg (without lens)
100V - 240V AC, 50/60Hz
Normal: 625 W
Standby: 0.25-1.6W (depending on HDBaseT and network settings)
2131 BTU/h
20,000 / 40,000 hours
38 / 33 / 29 dB
0°C to +45°C (20%RH - 85%RH)
-20°C to +60°C
5 years (12,000 hours)
All data is based on Canon standard testing methods except where indicated
Subject to change without notice.
* When using RS-SL07RST 4K lens, normal mode. In expanded mode, (optical performance not guaranteed) V: +/-104%, H: +/-25%.
Maximum lens shift in both directions is not possible.
** When Image mode is set to presentation / RS-SL07RST 4K lens
HDBaseT Transmitter operation confirmation chart.
A transmitter and a receiver is required to create an HDBaseT system. Normally, HDBaseT entails an external receiver and transmitter, and if these devices are made by the same manufacturer, their performance is usually guaranteed. However, because the projector has a built-in receiver, the receiver and transmitter used will be made by different manufacturers. For this reason, in the list below, confirm that the transmitter you are using works with the projector before use. (Canon does not guarantee operations)
Manufacturer | Model name | Image | Audio | LAN | Serial | |
---|---|---|---|---|---|---|
Crestron | DM-TX-4K-202C | Yes (4K compatible) | Yes | Yes | No | |
DM-TX-401C | Yes | Yes | Yes | No | ||
AMX | AVB-TX-MULTI-DXLINK | Yes*1 | Yes | Yes | No | |
Kramer | TP-780Txr | Yes (4K compatible) | Yes | Yes | Yes | |
TP-582T | Yes (4K compatible)*1*2 | Yes | Yes | Yes | ||
Extron*3 | XTP T USW 103 4K | Yes (4K compatible) | Yes | Yes | No | |
Gefen | GEF-HDCAT5-ELRPOL | Yes (4K compatible)*1*2 | Yes | Yes*4 | No | |
Atlona | AT-HDTX-RSNET | Yes (4K compatible)*1*2 | Yes | Yes | - | |
CYP | PU-507-KIT | Yes (4K compatible)*1*2 | Yes | Yes | Yes |